How to Program: 2021-2023 Ford F-150 Elite LED Fog Light

Elite LED Fog Light on Ford F-150
August 18, 2023 | Print this Page
How to Program: 2021-2023 Ford F-150 Elite LED Fog Light

Elite LED Fog Lights were designed for maximum performance and functionality. They include programmable daytime running lights, turn signals, and a welcome sequence. When installed in conjunction with Elite Max LED Headlights, the fog lights feature an integrated show mode.

The following programming guide will provide you with instructions for how to program Elite LED Fog Lights on the 2021-2023 Ford F-150. Be sure to read the Programming Tips to get started, then continue reading for a step-by-step guide!

For a printable .pdf of this programming guide, click here

NOTE: These instructions should be used only when the fog lamp is operated independently. If you have both the headlight and the fog light, all headlight programming will be applied automatically to the fog light. 

Programming Tips

  • Parking in front of a window or reflective wall makes it easier to see what’s happening!
  • While it seems like a lot of information, the programming method follows a standard theme. After just a few minutes, you’ll get the hang of it! Please contact Diode Dynamics with any questions.
  • Always start with the vehicle off, and with the fog light switch in the OFF position.
  • To enter any programming mode, you must flash your lights off and back on a specific number of times. If you forget the count, switch the lights off and wait 10 seconds. Then, start again.

DRL Color Programming

Elite LED Fog Light Control Switch image

Step 1 - Turn the hazard lights on and back off, so that they only flash one time.

Step 2 - Immediately toggle your fog lights on and back off three times.

DRL Color Selection Sequence

Step 3 - Turn the hazard lights on and back off again, so they only flash one time.

Step 4 - The fog light DRL will flash in the selected color three times, and save the selection. To change the color again, repeat this process.

DRL Color Table

Turn Signal Style Programming

Elite LED Fog Light Control Switch image

Step 1 - Turn the hazard lights on and back off, so that they only flash one time.

Step 2 - Immediately toggle your fog lights on and back off four times.

Turn Signal Style selection sequence

Step 3 - Turn the hazard lights on and back off again, so they only flash one time.

Step 4 - The fog light DRL will flash four times, and save the selection. To change the mode again, repeat this process.

Welcome Sequence Programming

Elite LED Fog Light Control Switch image

Step 1 - Turn the hazard lights on and back off, so that they only flash one time.

Step 2 - Immediately toggle your fog lights on and back off five times.

Welcome Sequence Programming selection

Step 3 - Turn the hazard lights on and back off again, so they only flash one time.

Step 4 - The fog light DRL will flash five times, and save the selection. To change the color again, repeat this process.

Factory Reset

Elite LED Fog Light Control Switch image

Step 1 - Turn the hazard lights on and back off, so that they only flash one time.

Step 2 - Immediately toggle your fog lights on and back off fifteen (15) times.

Step 3 - Turn the hazard lights on and back off again, so they only flash one time.

Step 4 - The DRL will flash white and then amber, to indicate a successful reset. You can proceed with any additional programming. 


Questions About the Programming?

If you have any questions or issues programming the Elite LED Fog Light in your Ford F-150, please contact us for further assistance.

Where Can I Buy Elite LED Fog Lights?

If you’re ready to upgrade your 2021-2023 Ford F-150 with Elite LED Fog Lights, you can purchase them by clicking here or using our dealer locator to find a dealer near you. 

Want to know more about Diode Dynamics products? Visit DiodeDynamics.com and subscribe to our newsletter for new product releases and more!

This Programming Guide is for the following SKUs: DD5169, DD5170

Previous article:
Next article: