How to Install: 2022-2023 Tundra Stage Series LED Pod Reverse Light Kit

LED Reverse Pod Light Kit on 2022-2023 Toyota Tundra
March 17, 2023 | Print this Page
How to Install: 2022-2023 Tundra Stage Series LED Pod Reverse Light Kit

The Stage Series LED Reverse Light Kit for the 2022-2023 Toyota Tundra adds LED Pods as high-power reverse lights and eye-catching red accent lights. The following installation guide will provide you with detailed instructions on how to install the Stage Series LED Reverse Light Kit for the 2022+ Toyota Tundra. Continue reading for step-by-step instructions below!

Installation Tools

  • 10mm Socket
  • 5/32” Allen Key
  • 3/8" Wrench
  • Zip Ties (included with Stage Series Pod Lights)

Mounting Instructions

Step 1 - Remove Bumper Bolt

Using a 10mm socket, remove the factory bolt on the underside of the truck bumper.

Tundra Rear Bumper Bolt

Step 2 -  Mount Universal Bracket

Secure the provided universal bracket with the factory bolt removed in the previous step. Then reinstall the factory bolt onto the truck bumper,  making sure that the curved portion of the universal bracket is facing towards the rear of the vehicle. 

Universal Bracket Kit on Bumper Bolt

Step 3 - Install Stage Series Pod

Install your new SSC1 or SSC2 pod onto the universal bracket using the provided hardware. Using a 5/32” Allen key and a 3/8" wrench, tighten the screw until the pod retains its position, but can pivot with force for aiming. 

Repeat these steps on the other side of the vehicle.

Install Stage Series reverse light kit

Wiring Instructions

wiring harness

Step 4 - Connect 7-Pin Harness

From underneath the vehicle, disconnect the factory trailer hitch connector. Connect the provided 7-pin trailer hitch harness in line between the connector on the OEM harness and the connector on the back of the bumper (A)

Note: If you purchased the toggle switch harness, follow the separate instructions included with that harness instead. 

7-pin trailer harness connector

Step 5

Plug the DT connectors (B) into the back of the LED pods. 

Step 6 - Aim Pod Lights

Aim the pods as desired. Then tighten down the hardware using a 5/32” Allen key and a 3/8" wrench. Aiming can be achieved with the pods installed on the vehicle. There is no need to remove the pods to re-aim. 

Step 7 - Test Function

Test the function. Then secure the wiring harness with the included zip ties to complete installation. 


Questions About the Installation?

If you have any questions or issues installing the Stage Series Reverse Light Kit for the 2022-2023 Toyota Tundra, please contact us for further assistance.

Where Can I Buy a Stage Series Reverse Light Kit for the 2022-2023 Toyota Tundra?

If you’re ready to upgrade your 2022-2023 Toyota Tundra with a Stage Series Reverse Light Kit, you can purchase one by clicking here or using our dealer locator to find a dealer near you. 

If you are looking to add additional Off-Road LED Lights to your Tundra, we have a variety of LED Light bars and Pod Light kits here!

Want to know more about Diode Dynamics products? Visit DiodeDynamics.com and subscribe to our newsletter for new product releases and more!

This Installation Guide is for the following SKUs: DD7401, DD7402, DD7404, DD7405

Previous article:
Next article: