The HitchMount LED Pod Reverse Kit for the 2019-2023 GMC Sierra 1500 allows you to install one C1R LED Pod in your 2-inch trailer hitch receiver, adding a high-power reverse light, additional running light, and 4th brake light.
The following installation guide will provide you with detailed instructions on how to install the C1R HitchMount LED Pod Reverse Kit on the 2019-2023 GMC Sierra 1500.
Table of Contents
Mounting Instructions
Step 1 - Locate Factory Connectors.
From underneath the rear of the truck, locate the two factory 6-pin connectors on either side of the spare tire.
Step 2 - Disconnect Factory Connectors.
Before attempting to disconnect the 6-pin connectors, slide the red locking tab into the unlocked position. Then, disconnect the factory connectors.
Step 3 - Connect 6-Pin Connectors In Line.
Beginning on the driver's side, plug the 6-pin connectors in line between the factory harness and the factory connector.
Be sure to fully seat and then lock the connectors. Repeat this on the passenger side.
Note: The section of the harness with the SafetyStrobe Control box can be installed on either side of the truck.
Step 4 - Route the DT Connector.
Route the DT connector through the back of the trailer hitch receiver.
Step 5 - Connect HitchMount Pod to Harness.
Remove the dust cap from the DT connector and plug the DT connector into your LED pod.
Step 6 - Install HitchMount LED Pod.
Using the patent-pending HitchMount clip, simply push the LED Pod into the trailer hitch receiver until it snaps into place.
Step 7 - Test Function.
Test the functionality of the HitchMount LED Pod Reverse Kit and then secure the wiring harness with the included zip ties to complete the installation.
Step 8 - Removing HitchMount.
To remove the HitchMount, depress the clips on either side and apply forward pressure to slide the lamp out of the receiver. Unplug the wire harness. If you plan to leave the harness disconnected for an extended period, unplug the harness from the 6-pin connectors as well for safe storage.
Otherwise, simply reinstall the dust cap and tuck the DT connector out of the way until it is again needed.
OPTIONAL: Using a HitchMount with a Hitch Pin
The HitchMount has been designed to stay securely in place during use. If you would like to add a locking hitch pin for added security (not included), you may easily accomplish this with slight modification. This modification does not void any manufacturer warranty.
Step 1 - Cut Out Retention Tabs.
To do so, push the retention tab outward and use a cutting tool to cut out the circular section on the tab. Repeat on the other side.
Step 2 - Connect HitchMount Pod to Harness.
Plug the DT Connector into the pod, and slide the HitchMount into the trailer hitch receiver.
Step 3 - Insert The Hitch Pin.
Slide the hitch pin into place with one hand, as you align the HitchMount with your other hand. It should be a tight fit, which will prevent rattling and movement once installed. Lock the pin if desired.
Questions About the Installation?
If you have any questions or issues installing the HitchMount LED Reverse Pod Kit for the 2019-2023 GMC Sierra 1500, please contact us for further information.
Where Can I Buy The 2019-2023 GMC Sierra 1500 C1R HitchMount LED Pod Reverse Kit?
If you're ready to upgrade your 2019-2023 GMC Sierra 1500 with the C1R HitchMount LED Pod Reverse Kit, you can purchase one by clicking here or using our dealer locator to find a dealer near you.
Want to know more about Diode Dynamics products? Visit DiodeDynamics.com and subscribe to our newsletter for new product releases and more!
Note: This guide is only for the C1R Kit.
This Installation Guide is for the following SKUs: DD7646, DD4147
Share This Post