The Stage Series Reverse Light Kit for the 2024+ Toyota Tacoma adds LED Pods as high-power reverse lights and eye-catching red accent lights. The following installation guide will provide you with detailed instructions on how to install the Stage Series LED Reverse Light Kit for the 2024+ Toyota Tacoma. Check out the installation video and continue reading for step-by-step instructions below!
Table of Contents
Installation Video
Installation Tools
- Ratchet
- 3/8" Wrench
- 5/32" Allen Wrench
- 5/16" Wrench
Mounting Instructions
Step 1 - Assembling Reverse Light Brackets
Align the included spacers with the universal bracket to sit flush with the bracket.
Drop in the carriage bolt and washer from the top of the bracket. Repeat these steps for both brackets.
Step 2 - Mounting Pods
Starting on the driver's side, locate two holes underneath the frame rail just under the rear bumper. With your bracket assembled, feed the carriage bolt up through the inboard hole and secure it with the supplied locknut and a 5/16" wrench.
Line up your pod with the bracket and secure it in place using 5/32 Allen and a 3/8" wrench.
Note: Leave the bolts loose enough to make aiming adjustments later. Repeat these steps on the other side for your second pod.
Step 3 - Installing Harness
Locate your seven (7) pin trailer harness underneath the vehicle on the backside of the rear bumper and disconnect it.
Install the included seven (7) pin harness in-line.
Route the other ends of the harness to the back of each pod and connect the DT connectors.
Be sure to secure any loose wire up and away from hot or moving parts.
Test your pods for functionality before moving on to the next step.
Step 4 - Final Adjustments
Rotate your pod left to right as desired and secure it using a 5/16" wrench.
Tilt the pod up and down as desired and tighten it down using a 5/32" Allen and a 3/8" wrench.
The installation is now complete. Enjoy your Stage Series Reverse Light Kit for the 2024+ Toyota Tacoma!
Questions About the Installation?
If you have any questions or issues installing the Stage Series Reverse Light Kit for the 2024+ Toyota Tacoma, please contact us for further assistance.
Where Can I Buy a Stage Series Reverse Light Kit for the 2024+ Toyota Tacoma?
If you’re ready to upgrade your 2024+ Tacoma with a Stage Series Reverse Light Kit, you can purchase one by clicking here or using our dealer locator to find a dealer near you.
Want to know more about Diode Dynamics products? Visit DiodeDynamics.com and subscribe to our newsletter for new product releases and more!
This Installation Guide is for the following SKUs: DD7943, DD7944, DD7945, DD7946, DD7947, DD7942P
Share This Post